sonarray-splash-compressor

Encompassing sound that vanishes into its surroundings.

Bring a whole new level of atmosphere and ambience to backyard entertaining.
Introducing the SONARRAY SR1 system, a complete outdoor audio system that delivers amazing sound and perfectly-even volume levels for areas up to 2000 square feet (186 square meters).

The SR1 system fully immerses outdoor spaces in perfectly balanced sound by strategically placing eight satellite speakers and a buried subwoofer around the perimeter while being hidden amongst the landscape. This optimized system approach results in breathtaking performance, and a perfect blanket of audio that does not disturb the neighbors.

Paired with a Sonance DSP amplifier, the SR1 system is tailored to adapt to any space’s hardscape or landscape. This ensures the SR1 system delivers unparralled audiophile performance.

In backyards and patios, the SR1’s system of satellites and subwoofer creates crystal clear audio emanating from everywhere, and raises the bar on affordable outdoor audio.

Traditional Speaker Coverage

The basics
In typical outdoor audio installations a pair of speakers are placed in one location and usually on the same plane. The result can produce various
undesirable effects:

Uneven volume
Speaker placement in one location creates very loud areas near those speakers and little to no sound further away. This can impact furniture arrangements
and natural gathering areas.

Unbalanced coverage
It is easy to move in and out of the left and right channels and miss discrete information in the audio.

Unwanted noise
Audio can spill over to neighboring properties creating unwanted disturbances.

System Speaker Coverage

A case for an outdoor system
Creating a system composed of satellite speakers and subwoofers envelops a
space fully in clear and balanced sound.

Even volume
This approach is similar to great lighting that has no hot
spots or dark spots, but rather provides smooth even coverage
throughout the area.

Sound from everywhere
The Sonarray SR1 system uses small satellite speakers and a subwoofer perfectly arranged around the perimeter of the property.

No disturbances
The SR1 system is positioned not to spill into surrounding
properties.

SONARRAY SR1 SYSTEM

Your Backyard Oasis

Easy to Install
The SR1 system runs off of a standard AV receiver or stereo amplifier. It consists of eight satellite speakers and one in-ground subwoofer that install
easily into any landscape.

Blends In
The satellite and subwoofer are finished in a neutral earth tone, allowing them to camouflage within the plants and foliage of your
outdoor area.

Withstands the Elements
Constructed of corrosion proof composites and featuring triple sealed enclosures, the Sonarray SR1 system can withstand whatever
mother nature has to offer; from -20° to 190° F (-29° to 88° C)

System Specifications

S4SAT (Quantity 8): 3.5” (98mm) anodized aluminum cone & Santoprene surround

S4SAT Dimensions: 6.5” L x 4.125” Dia. (165mm x 105mm)

S8SUB (Quantity 1): 8” (203mm) dual voice coil, polypropylene & Santoprene surround

S8SUB Dimensions: 22” L x 15” Dia. (559mm x 381mm)

System Impedance: 8 ohms per channel nominal

Frequency Response: 40Hz-20kHz +/- 3dB

Crossover Frequency: 100Hz

Power Handling: 50 watts minimum – 150 watts system

Sensitivity: 85dB and 89dB Sensitivity (satellite and subwoofer respectively), 2.83V / 1 meter

Satellite Dispersion & Throw: 60º dispersion with an optimum listening area 8’-20’ (2.4-6.1 meters) from the satellites

Placement Recommendations: Satellites- 6’-8’ (1.8-2.4 meters) apart along perimeter of listening area
Woofer- The center of the 8 satellites

Enclosure Material: Satellites- Non-corrosive sealed enclosures
Woofer- (HDPE) non-corrosive sealed enclosure

Included Accessories: Eight ground stakes, 24 silicone filled wire nuts

Listening Area: Up to 2000 square feet (186 square meters)*

Wire Recommendations: 18 gauge – up to 100 feet (30 meters) 4 conductor, stranded, direct burial
16 gauge – up to 150 feet (45 meters) 4 conductor, stranded, direct burial
14 gauge – up to 250 feet (80 meters) 4 conductor, stranded, direct burial
12 gauge – up to 400 feet (122 meters) 4 conductor, stranded, direct burial
10 gauge – up to 650 feet (198 meters) 4 conductor, stranded, direct burial

sr2-125-title-compressor
system-speaker-coveragesr2-125-amp-splash-compressor
The SR 2-125 Amplifier is purpose built to be the ideal companion for the SONARRAY SR1 satellite and subwoofer system. The SR 2-125 is a 125-watt stereo amplifier with DSP presets easily accessed through dials on the back of the amplifier. Whether the outdoor installation is hardscape or softscape, the amplifier presets optimize the best sound and performance of the SR1 system for any outdoor environment.
The amplifier includes digital coax, toslink and analog inputs to accommodate all types of sources and streaming devices. Each input has a loop output allowing for the simple connection of multiple SR 2-125 amplifiers to power multiple SR1 landscape audio systems. The SR 2-125 can be rack mounted with the included rack ears or surface mounted with included feet.

SONARRAY SR 2-125 Amplifier

  • 20 DSP presets
  • 2 Channel (1 stereo pair)
  • 125 Watts per channel @ 8 ohms
  • Coax, Toslink and RCA Inputs/Outputs
  • Rack ears and feet and included

SKU# 93135

SONARRAY SR1 System

  • 8 Satellite Speakers + 1 In-Ground Subwoofer
  • 8 Ohm impedance matched system
  • Perfectly even coverage up to 2,000 square feet*

SKU# 92983
*Depending on property layout

SONARRAY SR1 System with SR 2-125 Amplifier

  • 1 SR 2-125 Amplifier
  • 8 Satellite Speakers + 1 In-Ground Subwoofer

SKU# 93134

layout-spalsh-compressor

SONARRAY SR 2-125 Amplifier Specifications

Number of Channels: 2 (1 stereo pair)

Power Output – 8 ohms: 125 Watts RMS per channel
(both channels driven)

Power Output – 4 ohms: 200 Watts RMS per channel
(both channels driven)

Frequency Response: 5Hz – 50kHz, bandwidth limited

Total Harmonic Distortion: 0.07% (1kHz, 8 ohms)
0.06% (1kHz, 4 ohms)

Signal to Noise Ratio: -100dB (20Hz-20kHz)

Input Gain: 29dB

Input Sensitivity: 100mV for 1 Watt Output @ 8 ohms
1110mV for 125 Watts Output @ 8 ohms

Input Impedance: 20k ohms

Loop Output Impedance: 600 ohms

Maximum Analog
Input Voltage: 2.9V VAC RMS

Operating Voltage: 100-120V@60Hz, 220-240V@50Hz

AC Fuse: 5A (T5AL ~ 250V)

Rack Space Requirement: 1U – 1/2 Rack Width

Dimensions w/ Feet
(W x H x D): 8 5/8” x 2 1/8” x 16 13/16”
(219mm x 54mm x 427mm)

Dimensions w/ Rack Ears
w/o Feet (W x H x D): 19” x 1 3/4” x 16 13/16”
(482mm x 44mm x 427mm)

Shipping Weight: 11 lbs (5.0kg)

CONTACT US FOR A FREE ESTIMATE

IT’S FAST AND EASY!

Fill up the form and will get back to you as soon as we can.

[contact-form-7 id=”4950″]